本頁面標準信息均來源于網絡收集，或由參與標準制定的供應商提供，只作為參考使用，為確保測試結果的準確性、節省您的時間，如需ASTM C1184?14標準詳細信息或ASTM C1184?14具體測試方法，歡迎致電與我們技術人員聯系或給我們留言，我們將為您相關的技術支持。
1. Scope
1.1 This specification describes the properties of cold liquid applied, single-component or multicomponent, chemically curing elastomeric structural silicone sealants herein referred to as the sealant. These sealants are intended to structurally adhere components of structural sealant glazing systems.
1.2 Only those properties for which there are industry-agreed-upon minimum acceptable requirements, as determined by available ASTM test methods, are described in this specification. Additional properties may be added as ASTM test methods for those properties become available.
1.3 The values stated in metric (SI) units are to be regarded as the standard. The values in parentheses are for information only.
1.4 Committee C24, with jurisdiction over this specification, is aware of two comparable standards by other organizations: ETAG No. 002 and the Chinese national standard GB16776.
2. Referenced Documents
ASTM Standards
C603 Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
C639 Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C661 Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
C679 Test Method for Tack-Free Time of Elastomeric Sealants
C717 Terminology of Building Seals and Sealants
C792 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
C794 Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C1087 Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1135 Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1401 Guide for Structural Sealant Glazing
C1442 Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
G154 Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
G155 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
European Organization for Technical Approvals Document
ETAG No. 002 Guideline for European Technical Approval for Structural Sealant Glazing Systems
