本頁面標準信息均來源于網絡收集，或由參與標準制定的供應商提供，只作為參考使用，為確保測試結果的準確性、節省您的時間，如需ASTM D4637標準詳細信息或ASTM D4637具體測試方法，歡迎致電與我們技術人員聯系或給我們留言，我們將為您相關的技術支持。
ASTM D4637簡介
1.1ASTM D4637包括由三元乙丙橡膠 (EPDM)或氯丁橡膠(CR)制成的非增強或織物增強硫化橡膠片材,這些片材擬用于暴露在外的單層屋面膜。
1 .2表征這些片材的試驗方法和性能范圍,是對每一類別規定的,且為保證產品適用于預定目的的最小值。
1.3現場屋頂系統設計總則,例如耐火性、現場接縫強度、耐沖擊一刺穿性、材料相容性和風揭性,是必須考慮的一些因素,但不在本規格范圍之列。
ASTM D4637簡介
1. Scope
1.1 This specification covers flexible sheet made from ethylene-propylene-diene terpolymer (EPDM) intended for use in single-ply roofing membranes exposed to the weather. The tests and property limits used to characterize the sheet are values to ensure minimum quality for the intended use. The sheet may be non-reinforced, fabric- or scrim-reinforced, or fabric-backed vulcanized rubber sheet.
1.2 In-place roof system design criteria, such as fire resistance, field seaming strength, material compatibility, and uplift resistance, among others, are factors that must be considered but are beyond the scope of this specification.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents
ASTM Standards
D412 Test Methods for Vulcanized Rubber and Thermoplastic Elastomers--Tension
D413 Test Methods for Rubber Property--Adhesion to Flexible Substrate
D471 Test Method for Rubber Property--Effect of Liquids
D518 Test Method for Rubber Deterioration--Surface Cracking
D573 Test Method for Rubber--Deterioration in an Air Oven
D624 Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
D751 Test Methods for Coated Fabrics
D816 Test Methods for Rubber Cements
D1149 Test Methods for Rubber Deterioration--Cracking in an Ozone Controlled Environment
D1204 Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
D2137 Test Methods for Rubber Property--Brittleness Point of Flexible Polymers and Coated Fabrics
D5602 Test Method for Static Puncture Resistance of Roofing Membrane Specimens
D5635 Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
D6382 Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
D7635/D7635M Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
G155 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
